English - 13
Becoming Familiar with the Remote Control
The remote control is used mainly to:
◆
Change channels and adjust the volume
◆
Set up the television using the on-screen menu system
The following table presents the most frequently used buttons and
their functions.
Button
Viewing Function
Menu Function
Used to display the next
-
stored channel.
Used to display the
-
previous stored channel.
to
Used to display the corresponding channels.
➢
For double digit channels, the second digit must be
pushed immediately after the first. Failure to do this will
result in a single digit channel being displayed.
-/--/---
Used to select a channel numbered ten or over.
Press this button, and the “
--
” or “
---
” symbol is displayed.
Enter the two or three-digit channel number.
PRE-CH
Press the
PRE-CH
button. The TV will switch to the last
(
)
channel viewed.
To quickly switch between two channels that are far apart,
tune to one channel, then use the numeric buttons to select
second channel. Then, use the
PRE-CH
button to quickly
alternate between them.
Used to increase the
-
volume.
Used to decrease the
-
volume.
MUTE
Used to switch the sound off temporarily.
(
)
➢
To turn the sound back on, press this button again, or
press the
or
button.
MENU
Used to display the
Used to return to the previous
(
)
on-screen menu system.
menu or normal viewing.
-
Used to:
◆
Display a submenu
containing selections for
the current menu option
◆
Increase/decrease a
menu option value
-
Used to confirm your choice.
TV
Used to switch the
Used to exit from the menu
(
)
television on when it is
system and return to normal
in Standby mode.
viewing directly
EXIT
-
Used to exit from the any
(
)
disply.
BP68-00280A (J59A_Euro_ENG) 4/13/04 1:58 PM Page 13
