setup screen
86_
setup screen
exposure Setup
You can adjust the exposure level of the camera.
1.
Select <
exposure
>.
2.
Select each item and set it properly.
•
Brightness : Adjust the screen
brightness.
•
Shutter mode : Adjust the electronic
shutter of the camera.
- ESC (Electronic shutter control)
: Adjust the shutter speed
automatically according to the
ambient brightness.
- Manual : Adjust the shutter speed
of the camera manually.
- A.FLK (Anti flicker) : Select this feature if you encounter a flickering screen due
to a frequency mismatch with the ambient lighting.
`
Sens-up can be used only when the shutter type is <
ESC
>, and cannot be used when it is
<
Manual
> or <
A.FLK
>. But Sens-up can be used regardless of shutter type when WDR mode
is used. (apart from the influence of AGC)
`
The shutter cannot be used if the backlight compensation is set to WDR mode.
•
Shutter speed : Control the shutter speed manually.
•
SSNR3 : Specify the use of noise reduction.
`
SSNR3 mode cannot be used if the AGC mode is set to <
Off
> or <
Manual
>.
•
Sens-up mode : Automatically senses the darkness level at night or in a low
contrast scene and extends the accumulation time accordingly for a bright and
sharp image.
`
Sens-up can be used only when the shutter type is <
ESC
>.
`
Sens-up mode cannot be used if the AGC mode is set to <
Off
> or <
Manual
>.
`
The greater the video accumulation factor is, the brighter the screen is but the afterimage of a
moving object grows accordingly and the Auto Focus mode may not operate properly.
`
If the gain is not used, Sens-up will be disabled.
•
Sens-up limit : Set the work condition to Auto mode in a low contrast scene.
•
Iris : You can set the camera iris to Auto or Manual to your preference.
- Auto : Automatically sets the iris adaptively to the ambient lighting and shutter
speed.
- Manual : Iris F-No is set manually.
