English
_33
●
in
St
aLL
ation & connection
`
configuring camera Dip Switches
DIP switches for communication and ID protocols are located on the bottom of the camera.
`
connecting camera Safety cable and attaching camera
1.
First, as shown in the left hand picture, pull out the safety cable from the base and
then hook it to the mount. The safety cable is coiled inside the base.
`
To attach the camera to the mount, refer to the alignment guide marks as shown in the picture.
2.
Carefully attach the camera to the mount following the alignment guide marks as
shown in the picture.
J
`
Make sure to hook the camera’s safety cable to the mount before proceeding. Otherwise you may
be exposed to serious injury caused by the camera falling.
DIP Switches
NO
SW1
SW2
Safety
Cable
Align the
Direction Guides
Direction
Guides
Direction
Guides
