NETWORK PTZ CAMERA
User Guide
28
Chapter 3. Installing Camera & Network Setup
- Attaching Template & Installing STB-370NPC
Attach the enclosed template to the ceiling, then drill a hole in the ceiling according to the
88mm diameter hole marked on the template. Drop the camera cables down from the
ceiling through the hole. Next, install the base, STB-370NPC, to the ceiling as shown in the
picture.
Before installing the exposed bracket, open the hinged door at the bottom of the bracket as
shown in the picture. Hold the knob on the hinged door to open it.
- Connect Terminal Wires
Connect the cables to the terminal block on the hinged
door.
When connecting, please refer to 2.2 Camera Wiring
Interface Board. Once the wiring is complete, close the
hinged door.
t%POPUDPOOFDUUIFDBNFSBUPBQPXFSPVUMFUVOUJMUIFJOTUBMMBUJPOJTDPNQMFUF4VQQMZJOHQPXFS
while the installation is in progress may cause fire or damage the product.
Caution
3.6. Ceiling Installation Example
Knob
Template
