29
3.2.4 Alarm
Go to “Main Menu”→“Parameter”→ “Alarm” → “Motion” to enter into the interface.
3.2.4.1 Motion
Channel:
Enable or disable Motion function.
Enable:
Enables the use of a switch.
Sensitivity:
Support 1-8 level, 8 is the highest level.
Buzzer:
When detecting object moving, an alarm is turned on (disable, 10 seconds, 20
seconds, 40 seconds and 60 seconds).
Show Message:
Messages will be displayed on the screen when a moving object is
detected and alarms are enabled.
Send Email:
When a moving object is detected, an email will be sent to the address
entered.
Full Screen:
When a moving object is detected, a message will be displayed in full
screen.
Post Recording:
The duration time of the alarm recording can be set as 30 seconds, 1
minute, 2 minutes and 5 minutes.
Summary of Contents for SNK-D5081
Page 1: ...1 ...
Page 78: ...78 6 4 Accessories Attached SNK D5081 ...
Page 79: ...79 ...
Page 80: ...80 ...