Samsung SND-L5013, User Manual

Page: 108 / 164

to make recording on the micro SD memory
1.
Set the SD card unit to < on >.
2. Click the [ apply ( ) ] button.
3. Check the memory card’s < free size > and < total size >.
You can format the Micro SD card by clicking the < format > button.
`
Some frames may be skipped if the Micro SD memory card operates at the lower speed than
recommended.
For more details, refer to “ Recommended Micro SD/SDHC Memory Card Specifications ”. (Page 11)
`
For a Micro SD memory card with a large capacity, the formatting will be slowed down accordingly.
`
The data traffic will increase when the camera is set to higher resolution, higher bit rate, and/or higher
framerate.
If there is too much data traffic, some frame may be skipped although it is stored in a full frame.
`
When a frame skip occurs, images are saved at the rate of min. one image per sec.
4. Specify the storage action.
• Record profile : Shows recording profile’s codec type.
• Normal : Make recording at a certain frame rate.
• Event : Set the recording type for a certain event that occurs.
• Pre event duration : Specify the time point before the occurrence of the event;
starting from the time point, the images will be transferred. You can specify up to
5 seconds before the occurrence of the event.
• Post event duration : Specify the time point after the occurrence of the event; to
the specified time point, the images will be transferred. You can specify up to 120
seconds after the occurrence of the event.
• Record file type : It specifies the file format of the recorded images.
- STW : It is Samsung Techwin’s unique file format.
- AVI : It is the conventional avi format.
J
`
If the Record file type is changed, the existing data is formatted.
• Overwrite : If the Micro SD memory is full, this will delete old data and store new
data in replacement.
• Auto delete : Data for a certain period is deleted, while other data is not deleted.
This can be set within the range of one day to 180 days.
J `
If the storage period is expired, data is automatically deleted and new data will be recorded.
Once deleted, it cannot be recovered.
setup screen
108_ setup screen