Samsung SMT-W5100E User Manual Download Page 58

Page: 58 / 61

Select

[Save]

[Registration]

, and press

[OK]

- [Save] only saves the changed value, while

[Registration]

saves the value and also performs reregistration

Help

Press the

[Menu]

button in idle mode, and then select the

[9. Help]

icon.

Function Description

For the convenience of users, Function Descriptions provides some helps on using functions.

[MENU]

9. Help

[OK]

[1. Function Desc]

(Select the function description)

[OK]

- Soft Menu

: Briefly describes Soft Menu including Station Msg,

DoNotDisturb, Page and Conference.

- Phone Settings

: Briefly describes Call Forward, Program Msg, and

Intern. Lock.

- Busy Call Function

: Briefly describes the functions to be used during a

call, such as Call back, Station Msg, Camp On, Transfer, Hold, and Mute.

Troubleshooting

When any problem occurs in your station, you can fix the problem with this menu.

[MENU]

9. Help

[OK]

[2. Troubleshooting]

(Select the Troubleshooting description)

[OK]

- This menu describes how to troubleshoot some issues, such as No ring

tone, Howling, Can’t Make a Call, Unregisterable, Call Disconnect and No
Operation.

Home Page

Table of Contents

Summary of Contents for SMT-W5100E






























































Search results

Summary of Contents for SMT-W5100E

Reviews:

Samsung SMT-W5100E, User Manual, Page: 58 / 61

Search results

Summary of Contents for SMT-W5100E

Reviews: