Samsung SMT-W5100E Page 33 User Manual Download

Page: 33 / 61

Search

This function allows you to check the messages saved in the Templates.

[MENU]

3. Message

[OK]

2. SMS

[OK]

3. Templates

[OK]

2. Search

[OK]

(Select the message

[OK]

- Press the

[Menu]

button to delete selected message or to delete all

messages.

- After the message is selected, press the

[Menu]

button to send, edit,

delete the selected message.

SMS Settings

Alert Time

This function allows you to set alert time that notifies to the user when a message arrives.

[MENU]

3. Message

[OK]

2. SMS

[OK]

4. SMS Settings

[OK]

1. Alert Time

[OK]

(Select the alert time)

[OK]

VMS (Voice Mail System)

Message

This function allows you to check the number of the new VMS messages and hear new message
contents. This function is available after installing VMS and setting a VMS group.

[MENU]

3. Message

[OK]

3. VMS

[OK]

1. Message

[OK]

- After accessing the VMS, You can use the soft menu by pressing the

[Menu]

button.

Home Page

Table of Contents

Summary of Contents for SMT-W5100E






























































Search results

Summary of Contents for SMT-W5100E

Reviews:

Related manuals for SMT-W5100E

Brands by name

Popular brands

Samsung SMT-W5100E, User Manual

Search results

Summary of Contents for SMT-W5100E

Reviews:

Related manuals for SMT-W5100E

Brands by name

Popular brands