Samsung SMT-i6010 User Manual Download Page 56

Page: 56 / 97

_ © SAMSUNG Electronics Co., Ltd.

- If you want to change

[Bluetooth mode]

[smartphone]

, you have to change

[Headset mode]

[Standard]

also.

- A Bluetooth headset is provided separately.

- The method of use and support may differ depending on the type of Bluetooth

headset. Refer to the user manual of the Bluetooth device.

- EHS Equipment supported with phone is Plantronics APU-71.

Bluetooth Connection

[Bluetooth mode is ‘Headset’]

Select

[Menu]



[Settings]



[Bluetooth & Headset]



[Headset]



[Set]

After searching nearby Bluetooth devices,
the connection information is displayed.

After selecting a Bluetooth headset to connect to the phone, press the

[Pair]

button. After checking it is the correct device, press the

[Yes]

button.

- The Bluetooth headset to connect must be in the pairing waiting mode.

If Bluetooth headset is connected, Bluetooth Icon (

) will be activated at

the Title-Bar.

- If you use Bluetooth headset, you have to activate headset mode (

) by pressing

headset key.

- The operation may differ from system.

When you press the

[Disconnect]

button, the device is disconnected.

When you press the

[Remove]

button, the device is deleted from the

search list as well as it is disconnected.

[Bluetooth mode is ‘Smart Phone’]

Summary of Contents for SMT-i6010


































































































Search results

Summary of Contents for SMT-i6010

Reviews:

Related manuals for SMT-i6010

Brands by name

Popular brands

Samsung SMT-i6010, User Manual

Search results

Summary of Contents for SMT-i6010

Reviews:

Related manuals for SMT-i6010

Brands by name

Popular brands