Samsung SMT-i6010 User Manual Download Page 54

Page: 54 / 97

_ © SAMSUNG Electronics Co., Ltd.

Security

The user can set a password which is then used to set the functions of the phone,
and the lock function. This prevents other people from using the phone.

- The default password is

[1234]

If you forget password, contact to system manager.

Change Password

Select

[Menu]



[Settings]



[Security]



[Change Password]

You can change a password.

Menu Lock

Select

[Menu]



[Settings]



[Security]



[Phone]

Call Lock

Select

[Menu]



[Settings]



[Security]



[Call]

- [Disable]:

you can disable Call Lock.

- [Outbound]:

you can enable Outbound Call Lock.

- [All]:

you can enable all Outgoing Call Lock.

Bluetooth & Headset

You can set up a function related to the headset and Bluetooth.

Bluetooth function is suppored 6011 model only.

Using Hardware Headset Key

This prevents accidental presses Headset Key which is placed in front side.

Summary of Contents for SMT-i6010


































































































Search results

Summary of Contents for SMT-i6010

Reviews:

Related manuals for SMT-i6010

Brands by name

Popular brands

Samsung SMT-i6010, User Manual

Search results

Summary of Contents for SMT-i6010

Reviews:

Related manuals for SMT-i6010

Brands by name

Popular brands