56
_ © SAMSUNG Electronics Co., Ltd.
HOLD PICKUP
This is the function used to pick up the call held from a station line, through another
phone.
1
Hold a call from a station line. From another
phone, select the
[SVC]
soft button
Æ
[HOLD
PICKUP]
and press the
[OK]
button.
2
If you press the extension line number where the
call is held, the call is connected to the station
line.
MEET ME PAGE
This is the function used to find the person who originated paging and to receive the
call.
1
In the standby mode, select the
[SVC]
soft button
Æ
[MEET ME PAGE]
and press the
[PAGE]
button.
- Or in the standby mode, press the
[5] [4]
button-a
Meet Me Page function code.
- This Meet Me Page function is available only for the
general phone mode.
2
Select a desired zone from the paging zone
[0] -
[9]
. When a confirmation signal tone is heard,
speak to the handset, and ask the target person
to press the
[5] [6]
button.
Then, press the
[OK]
button.
- To use this paging function, the paging zones must be
defined in advance. For information on defining the
paging zones, consult your system administrator.
- You should not hang up the handset until the target
person answers. When the target person presses the
[5] [6]
button, the call is connected automatically
to the phone of the paging person.
