Samsung SMT-4011, User Manual

Page: 69 / 790

Audio Input 2 RCA Jack Red(R) White(L), 0.5 Vrms (-9 dB)
PC Audio Input 3.5 Ø Stereo Jack, 0.5 Vrms (-9 dB)
Frequency RF: 80 Hz ~ 15 kHz (at -3 dB)
Response A/V: 80 Hz ~ 20 kHz (at -3 dB)
Plug and Play Capability
This monitor can be installed on any Plug & Play compatible system. The interaction of the monitor and the
computer systems will provide the best operating conditions and monitor settings. In most cases, the monitor
installation will proceed automatically, unless the user wishes to select alternate settings.
Dot Acceptable
TFT LCD panels manufactured by using advanced semiconductor technology with precision of 1ppm (one
millionth) above are used for this product. But the pixels of RED, GREEN, BLUE and WHITE color appear to
be bright sometimes or some black pixels may be seen. This is not from bad quality and you can use it without
any problelms.
• For example, the number of TFT LCD sub pixels contained in this product are 3,133,440.
Note
• Design and specifications are subject to change without prior notice.
Class B Equipment (Information Communication equipment for residential use)
• This product complies with the Electromagnetic Compatibility Directives for residential use and can be
used in all areas including common residential areas. (Class B equipment emits less electromagnetic
waves than Class A equipment.)
PowerSaver
This monitor has a built-in power management system called PowerSaver. This system saves energy by
switching your monitor to low-power mode when it has not been used for a certain amount of time. The monitor
automatically returns to normal operation when you press a key on the keyboard. For energy conservation, turn
your monitor OFF when it is not needed, or when leaving it unattended for long periods. The PowerSaver system
operates with a VESA DPM compliant video card installed in your computer. Use the software utility installed on
your computer to set up this feature.
State
Normal
Operation
Power saving
mode
Power off
EPA/ENERGY 2000
Power off
Power Indicator Green Green, Blinking Amber Black
Power Consumption
Less than
210 W
Less than 1 W
(Off-mode)
Less than 1 W
(Power button)
0 W
(Power Switch)
This monitor is EPA E NERGY STAR
®
compliant and ENERGY2000
compliant when used with a computer equipped with VESA DPM
functionality.
As an E NERGY STAR
®
Partner, SAMSUNG has determined that this
product meets the E NERGY STAR
®
guidelines for energy efficiency.
Preset Timing Modes
Preset Timing Modes
If the signal transferred from the computer is the same as the following Preset Timing Modes, the screen will be
adjusted automatically. However, if the signal differs, the screen may go blank while the power LED is on. Refer
to the video card manual and Adjusts the screen as follows.
Display Mode
Horizontal
Frequency
(kHz)
Vertical
Frequency
(Hz)
Pixel Clock
(MHz)
Sync Polarity
(H/V)
IBM, 640 x 350 31.469 70.086 25.175 +/-
IBM, 640 x 480 31.469 59.940 25.175 -/-
IBM, 720 x 400 31.469 70.087 28.322 -/+
68
zt{T[WXXTl•Ž__T•–Tˆ‹‹U—‹GGG^W zt{T[WXXTl•Ž__T•–Tˆ‹‹U—‹GGG^W YWW^TXXTY_GGG㝘㤸GXWaZ_a[^ YWW^TXXTY_GGG㝘㤸GXWaZ_a[^