Samsung SMT-4011, User Manual

Page: 66 / 790

blinks every 0.5 or 1 seconds.
The screen is blank and it is
blinking.
z If you see the "TEST GOOD" message on the screen when you
pressing the MENU button, check the cable connection between
the LCD monitor and the computer to ensure that the connector
is properly connected.
Problems related to Audio
Note
• Problems related to audio signals and their solutions are listed below.
Problems Solutions
No sound. z Ensure that the audio cable is firmly connected to both the
audio-in port on your LCD monitor and the audio-out port on
your sound card.
(Refer to the Connecting the LCD monitor )
z Check the volume level.
The sound level is too low.
z Check the volume level.
z If the volume is still too low after turning the control to its
maximum, check the volume control on the computer sound
card or software program.
The sound is too high or too low. z Adjusts the Treble and Bass to the appropriate levels.
Problems related to the Remote Control
Note
• Problems related to the remote control and their solutions are listed.
Problems Solutions
The remote control buttons do not
respond.
z Check the polarities (+/-) of the batteries.
z Check if the batteries are empty.
z Check if the power is on.
z
Check if the power cord is securely connected.
z Check if a special fluorescent or neon lamp is on in the vicinity.
]
5
zt{T[WXXTl•Ž__T•–Tˆ‹‹U—‹GGG]^ zt{T[WXXTl•Ž__T•–Tˆ‹‹U—‹GGG]^ YWW^TXXTY_GGG㝘㤸GXWaZ_a[^ YWW^TXXTY_GGG㝘㤸GXWaZ_a[^