Samsung SMT-190Dx, User Manual

Page: 46 / 354

Eng-6
USER'S MANUAL USER'S MANUAL
Chapter 10 : Monitor
Setup Menu
No Signal Display
When there is no connection at the VGA input, the On
Screen Display will show this message.
<VGA mode>
Check signal cable.
VGA
OSD Menu Selection
Press DVR/LCD button to select LCD MENU or DVR
MENU by turns. If DVR/LCD LED is green,it means LCD
mode. if it is red, it is DVR mode.
A. Input Menu
Input
Source List : DVR

PIP

Edit Name

Move Enter Exit
Inputs can be set to VGA mode.
1. Press the MENU and ENTER button.
. Press the ENTER or

button and then

/

button to select input menu.
. Press the ENTER or

button to save the setting
and exit.

PIP ON (VGA mode only)
PIP
Move Enter Return
PIP : Off

Size :

Position :

If you didn't select VGA input, this menu is not available.
1. Press the MENU and ENTER button.
. Press the

/

and ENTER button to select the
PIP menu.
. Press the ENTER or

button to see the sub menu.
. Press the

/

and ENTER button to select On.
5. Press the MENU or

button repeatedly to exit.
USER'S MANUAL