Samsung SmartServer 3840, Installation Manual

Page: 20 / 67

10
Installation Guide
3. Refer to the documentation that comes with your adapter for any cabling instruc-
tions.
Note: Route adapter cables before you install the adapter.
4. Set any jumpers or switches as described by the adapter manufacturer.
5. Install the adapter:
a. Open the blue adapter guide by lifting the front edge, as shown in the illustra-
tion.
b. Carefully grasp the adapter by its top edge or upper corners, and align it with
the connector on the I/O board.
c. Press the adapter firmly into the adapter connector.
Attention: When you install an adapter, be sure the adapter is correctly
seated in the connector. Improperly seated adapters might cause damage to
the I/O board or to the adapter.
d. Push down on the blue adapter guide to keep the adapter steady.
e. Close the tab; then, push down on the blue adapter retention latch until it
clicks into place, securing the adapter.
6. Connect the internal cables to the adapter.
7. If you have other options to install or remove, do so now.
8. Go to “Completing the installation” on page 29.
NO
TE:
FOR
PR
OPER
AIRFLO
W, REPLA
CE F
AN
WITHIN 2 MINUTES
FR
ONT O
F BO
X
NO
TE:
FOR PR
OPER
AIR
FLO
W, REPL
ACE F
AN
WITHIN
2 MINUTES
FR
ONT OF BO
X
Tab
Adapter
retention
latch
Attention
LED
Power
LED
Adapter guide
PCI-X
divider