Appendix
168
Removing the battery
•
To remove the battery, you
must
visit an authorised service centre with the provided
instructions.
•
For your safety, you
must not attempt to remove
the battery. If the battery is not
properly removed, it may lead to damage to the battery and device, cause personal
injury, and/or result in the device being unsafe.
•
Samsung does not accept liability for any damage or loss (whether in contract or tort,
including negligence) which may arise from failure to precisely follow these warnings and
instructions, other than death or personal injury caused by Samsung’s negligence.
1
Pull out the S Pen from the slot.
2
Insert the device opening tool into the gap beside the S Pen slot.
Then, start separating the back cover from the device by using the tool to pry them apart.
Take care when inserting the tool to avoid damaging the device’s internal
components.
3
Reinsert the tool at regular intervals around the device and pry the back cover from the
device.
Rotate the back cover carefully and ensure that the hooks are not damaged.
4
Remove the back cover and place the device face down on a flat work surface.
5
Loosen and remove the screws from the device.
6
Disconnect the battery connector and remove the tape.
7
Remove the battery.