Disassembly and Assembly
63
9
Pull up on the suction cup with strong, steady force to create a gap between the back
cover and the frame. Slide the opening pick back and forth along the right edge to
slice through the adhesive.
Leave the opening pick inserted in the right edge to prevent the adhesive from
resealing.
•
As the back cover can be damaged by excessive force, be careful not to damage
the back cover.
•
As the internal circuitry can be damaged, do not insert the opening pick more
than 3 mm.
If you have trouble creating a gap, heat the microwaveable heating bag
additionally, and apply it on the back cover to further soften the adhesive. When
reheating, it should be heated no longer than 30 seconds.
Summary of Contents for SM-A057G
Page 1: ...www samsung com REPAIR GUIDE SM A057G English Rev 1 0...
Page 47: ...Calibrations 47 5 The calibration will perform automatically 6 Check the calibration result...
Page 57: ...Disassembly and Assembly 57...
Page 66: ...Disassembly and Assembly 66 13 Lift up the back coverslowly and remove it gently...
