Samsung SL10D10, User Manual, Page: 68 / 87

Blank screen

Check that all components connected to the input jacks are turned on.

Try another channel.

Press the INFO button on the front panel of the DIRECTV Receiver to see if the channel
banner appears. If it does not, check the Setup and Connections section for instructions about
connecting your satellite receiver.

Press the POWER( ) button on the front of the Samsung FlipTop powered by DIRECTV
®
.

Check that Video Source set to DIRECTV in the LCD panel menu.
Temporary loss of the satellite signal or Searching for Satellite Signal message

Your satellite system may be experiencing rain fade, a temporary loss of the satellite signal due
to unusually heavy rain clouds or rainfall. Rain fade is usually brief, lasting only as long as the
heavy rain cloud condition persists.

Your dish may be blocked. Check that something is not blocking the dish.
Partial programming loss/channels missing from the Guide/channel is in the Guide but
can’t tune to

Your satellite dish antenna may be incorrectly configured. Check the dish type set in your
receiver’s preferences and change if necessary. Press the MENU key on the remote control,
then select Settings then Setup . In the next menu, select Satellite , then Repeat Satellite Dish Setup .
Follow the steps. From the Satellite Dish Type screen, make sure the proper dish type is selected
(round, oval with a dual LNB or oval with a triple LNB).

The channels might be excluded from the Favorites list currently in use. Press MENU on the
remote, select Favorites , then All Channels .
Other Information
Troubleshooting
60