COLOR DOME CAMERA
User’s Manual
16
COLOR DOME CAMERA
User’s Manual
17
- OFF: LENS SHADE NOT IN USE
- ON: LENS SHADE IN USE
1. When the SETUP menu screen is displayed, select
EXPOSURE by using the Function Setup switch so that
the arrow indicates 'EXPOSURE'.
2. Select a desired mode using the Function Setup switch.
Operating Your Camera
EXPOSURE
LENS SHADE diminishes brightness contrast to obtain balanced view on the monitor.
LENS SHADE
MAIN SETUP
1.LENS SHADE
ON
2.EXPOSURE
MAIN SETUP
1.LENS SHADE
ON
2.EXPOSURE
3.WHITE BAL
ATW
SHUTTER :
You can select either auto or manual shutter.
- A.FLK : Select this when you experience picture flicker, which can happen when
there is a clash with the frequency of the installed lighting.
- ESC : Select this to control the shutter speed automatically. If ESC is selected, the
shutter speed is automatically controlled depending on the ambient
illumination of the subject.
- MANUAL : You can control shutter speed manually.
AGC (AUTO GAIN CONTROL) :
The higher the gain level, the brighter the screen - but the higher the noise.
- OFF : Deactivates the AGC function.
- LOW : Allows automatic gain control from 5.3dB to 32dB.
- HIGH : Allows automatic gain control from 5.3dB to 37dB.
SENS-UP :
When it is night or dark, the camera automatically
detects the light level and maintains a clear picture if
this mode is activated.
- OFF : Deactivates the SENS-UP function.
- AUTO : Activates the SENS-UP function.
RETURN :
Select this to save the changes in the EXPOSURE menu and return to the SETUP menu.
• If you press the Function Setup switch in ‘AUTO’ mode, You can adjust brightness by
adjusting the SENS-UP level. (x2 ~ x512)
• Note that the higher the SENS-UP level, the brighter the screen, but the more likely
it is that an after-image will appear.
• Although Noise, Spots, and Whitish symptoms may occur in SENS-UP operation
when the sens-up level is increased, this is normal.
Notes
MAIN SETUP
1.LENS SHADE
ON
2.EXPOSURE
3.WHITE BAL
ATW
4.BACKLIGHT
OFF
Use the White Balance function to adjust the screen color.
1. When the SETUP menu screen is displayed, select ‘White Bal.’ by using the Function
Setup switch so that the arrow indicates ‘White Bal.’.
2. Select a desired mode using the Function Setup switch.
White Balance (White Bal.)
※
Select one of the following 5 modes, as appropriate for your purpose.
ATW : Select this when the color temperature is between 1,700°K and 11,000°K.
INDOOR : Select this when the color temperature is between 4,500°K and 8,500°K.
