37
13. Installation
AF50MS3AF50MS3MCEEXHC, AF50MV3AF50MV3MCEEXHC
•
Please use rated wires or products (with heat resistance over 105 °C) of all the wires and the switches
or fuses in the cabinet panel. (Retailer and installer is responsible for the use of parts that does not
meet the wire standards or capacity requirements)
• Make sure that wires doesn’t make any sparks around the auxiliary power switch or installed in a place
with high temperature. (If the ambient temperature is high, allowable current of the wire will decrease
and current reduction factor will occur.)
• Please install the auxiliary power switch in a dry place and install panel board or electrical component
box.
• Please install circuit breaker in the panel board.
• When connecting the main power, press the wire to the terminal to secure connection.
• Selecting crimp-style ring terminal
Silver solder
Thickness of the wire (mm²)
B (mm)
d2 (mm)
2.5
Less than 9.5
More than 4.5
4
Less than 9.5
More than 4.5
6
Less than 9.5
More than 4.5
10
Less than 15
More than 8.4
CAUTION
