05
S
YS
TE
M
S
ET
U
p
System Setup _
27
External Keypad
Menu for setting up a keypad device to remotely control the DVR.
1
DVR ID
Enter the DVR's ID (1 through 255) so that the
keypad device may identify the DVR.
2
Keypad ID
Enter the keypad's ID (1 through 4) so that the
DVR may identify the keypad.
3
Keypad Setup
Keypad Name
: Assign name to the keypad.
Use
: Enable or disable keypad use.
Keypad model
: Select the model of the keypad
device you wish to use.
Speed
: Select a baudrate (2400Bps - 115200Bps)
for communication between the keypad
device and the DVR.
Address
: Select the keypad device’s address (0
through 32).
Port
: Identify the number of the port through which
the keypad device connects to the DVR.
mode
: Identify the interface method (RS232,
RS422, or RS485) of the port through which
the keypad device connects to the DVR.
Parity
: Select the bit type (None, Odd, Even, Display,
Blank) for detecting data transmission errors.
Data Bits
: Select from 4, 5, 6, 7, and 8.
Stop Bits
: Select from 1, 1.5, and 2.
Default
: Reset all settings to default.
When using a keypad device, please ensure
that communication settings for both the
DVR and the keypad device are the same.
Communication setting mismatch can
prevent the keypad device and the DVR
from communicating.
Refer to the keypad manufacturer’s
product manual for further information on
the keypad device.
3
1
2
SPR-9816-9716.indb 27
2008-07-03 오후 2:46:44
