INTRODUCTION
Smart Viewer is a program to be installed on
your PC. Using this program, you can monitor
the video and audio data through the network
environment without accessing the site where
the product is installed.
MAIN FEATURES
MPEG-4 Video Compression:
It provides
good video quality.
G.711 Voice Compression:
It provides good
audio quality and use of directional MIC can
improve the quality of remote voice.
Transmission of video/audio streams
through RTP (Real-Time Transport
Protocol):
The video playback feature is
excellent and the transmission speed is not
lowered abruptly even in multi-user connection.
Commands & controls by RTSP (Real-Time
Streaming Protocol):
It enables safety control
through the network.
Multiple transport protocols
are supported
(TCP/IP and UDP (Unicast, Multicast)).
Access to video and audio data
by entering
IP address only.
Local recording
(*.dvr format) on PC and
recorded
video data conversion into frame
unit (JPEG format).
Up to 3 users can
connect
to the DVR
simultaneously. (If the multicast is used, up to 6
users can connect.)
A Smart Viewer
can connect to 16 DVRs
simultaneously.
The Smart Viewer is optimized for the
resolution of 1024x768.
PC SPECIFICATION
(RECOMMENDED)
OS: Win2000 and WinXP
Recommendation
- CPU Pentium 3, 1GHz or higher
- RAM 256 MB or higher
- VGA RAM 32Mb or higher
- DirectX 8.1 or higher
The number of playback frames may
vary depending on the recording rate,
video size, and PC specification. For the
detailed specification, refer to Appendix 5.
Smart Viewer INSTALLATION
1.
Insert the Smart Viewer program CD into the
CD ROM drive.
2.
Open the Smart Viewer folder.
3.
Execute the “Setup.exe” file.
4.
Click
Next >
.
Smart Viewer
46
_ Smart Viewer
SHR-5162_Eng.indb 46
2007-8-2 14:48:14
