Samsung SHR-3040 Page 58 User Manual Download

Page: 58 / 68

web viewer

image eDit

Click <

OPeN

> and select a backup fi le to play.

Switch to Single Screen mode and click <

eDit

The “

eDit tOOl

” window appears.

When done, click <

eDit

Switch to backup play mode.

EDIT TOOL

Contrast

Adjust a bright area to brighter, and a dark area to darker.

Adjust the contrast to a low level to reduce the brightness.

Brightness

Adjust the image to a bright level.

Adjust the image to a dark level.

Sharpness

Sharpens the borders.

Blur

Makes the image look soft.

Return

Restores your video settings to the original.

Capture

Saves the image in the JPEG format.
The image will be saved in the installation directory of the backup player.

Prints out the image.

1.
.

02489A_SHR-3040_ENG.indb 58

2009-11-10 오후 2:14:17

Summary of Contents for SHR-3040





































































Search results

Summary of Contents for SHR-3040

Reviews:

Related manuals for SHR-3040

Brands by name

Popular brands

Samsung SHR-3040, User Manual

Search results

Summary of Contents for SHR-3040

Reviews:

Related manuals for SHR-3040

Brands by name

Popular brands