Samsung SHR-2160, User Manual

Page: 25 / 211

2-8
English
5. When mounting an additional HDD, the primary master has to be mounted.
Mount the HDD you want to add after setting the master/slave jumpers in the proper order.
Mount the HDD to the bracket-HDD with (A)SCREW-SPECIAL (BWH,6-32UNC,L10.5) (4 spots)
that was provided as an accessory.
6. Re-mount the bracket-HDD mounted with the HDD’s to the place where it was separated
from. Place the bracket-HDD so that all five mounting spots on the bottom and the
bracket-HDD’s mounting holes are perfectly aligned, then slide it toward the outside of the
product and tighten the screws.
When adding one – Primary slave (add one
additionally on the top of the
bracket that has a built-in HDD
when coming out of the factory.)
When adding two – Secondary master (mount
under the bracket that is empty
when coming out of the factory.)
When adding three – Secondary Slave (mount on
the top of the bracket that is
empty when coming out of the
factory.)
SHR-2160/2162/2080/2082-E-0 10/18/07 3:55 PM Page 2-8