Samsung SHR-1010, User Manual

Page: 7 / 38

1-6
GB
No Name Function
External In/Out
Port
FACTORY RESET
POWER
●
The system gives an alarm when the High(5V) signal incomes
for more than 0.5 seconds in the N.C.(Normally Closed) mode
and when the Low(0V) signal incomes for more than 0.5 sec
onds in the N.O.(Normally Open) mode.
●
GND
● ALARM OUT: The High(5V) signal comes out during alarm
recording.
●
ALARM RESET IN : The system cancels the alarm when the
Low(0V) signal incomes for more than 0.5 seconds.
●
1 SHOOT REC IN
●
REC START IN: The system starts recording when the
Low(0V) signal incomes for more than 0.5 seconds.
● REC END: The Low(0V) signal comes out for about 1 second
when you set the DISK END MODE in the RECORD MODE
SETUP menu to SETUP and the HDD consumes all of its free
space.
●
TRIGGER OUT: This signal converts the Multiplexer record
ing output screen.
Initializes the system.
Supports the DC power socket.
You can plug in the 100-250 VAC power cord.
7
8
9
1-5
DIGITAL VIDEO RECORDER
GB
DIGITAL VIDEO RECORDER
Rear View
No Name Function
Image Input Port
THROUGH
Terminal
Image Output Port
S-VHS PORT
Voice In/Out Port
RS-232 Port
It is the composite image signal input port(BNC Style
Connector).
You can use THROUGH Terminal to send VCR signal to
another VCR.
It is a composite image signal input port (BNC Style Connector).
It is the S-VHS image signal in/out port.
It is a voice signal in/out port(RCA Jack).
It is a serial port for remote control.
1
2
3
4
5
6
! @ # $ % ^ & * (
Caution Caution
If suffocated, the air inlet or outlet may harm the product performance. Please
install the product where you can secure free ventilation. Never allow goods
around the air inlet or outlet if they are big enough to suffocate it.
If you want to run DVRs on cabinets or Reck, be sure to secure air ventilation.