Note : Pressing the [REG] button is only available while the door is open. (Deadbolt must be
unsecured.)
Basic Functions
1. Factory Reset
All registered Master/User data will be deleted, and Master PIN Code is set to
‘1234’. Also Z-
Wave Door Lock is being removed from a network.
①
Press the [REG] button for 3 seconds. (Ding dong -> Ding ding)
②
Press the [*] button after pressing the [4560852580] button.
(Success : Ding dong dang, Fail : Ding dong Ding dong)
※
Use this procedure only in the event that the network primary controller is missing or
otherwise inoperable.
2. Changing the Master PIN Code
You can enter only one Master PIN Code. If changing the Master PIN code, All User PIN
Codes are deleted.
①
Press the [REG] button. (Ding dong)
②
Enter the new Master PIN Code, and press the [*] button.(4~12digits) (Ding dong dang)
3. Registering a User Card
You can register up to 20 User Card. (Supproted ISO14443 A Type)
To register multiple cards, lightly place another card to the card reader within 20 seconds
after registering the previous card. Also you can add card later after completing registration.
①
Press the [REG] button. (Ding dong)
②
Place the card to be registered on the card reader of the exterior body.(Ding dong dang)
③
Place the card on the card reader for the addtional registration or press the [REG] button
to quit.
