11
Samsung SDS
Digital Door Lock
SHP-A30
Samsung SDS
Digital Door Lock
SHP-A30
C
B
F4
F4
5. Fix Screw for the Interior Unit
1. Before installing the interior unit,
1) Check the direction of the thumb turn
while the dead bolt is in the OPEN PO
-
SITION.
2) Check if the knob of the interior unit is
placed at the center.
2. Use the cover pin to push the battery cover
hole on the upper section of the interior unit
to open the battery cover.
3. Insert the tailpiece of the interior unit verti-
cally into the dead bolt.
4. Align the Interior Unit on to the Interior
Mounting Plate, and attach it with 3 screws.
Tighten the screw on the lower section of the
interior unit and connect the screw cover.
CAUTION
: Insert the tailpieces vertically into
the dead bolt, equally on the left and right.
6. Final Check
1. Install 4 batteries. A Melody will sound
when all 4 batteries are installed
correctly. After that, insert the battery
bracket to fix the battery.
2. Once the batteries are connected, the
dead bolt is automatically set. After
that, press [OPEN/CLOSE] button to
check whether the dead bolt works
properly.
3. Once the dead bolt is completely set,
install the battery cover.
CAUTION
: Check the movement of the
dead bolt by the thumb turn.
I
J
B
2
3
C
B
F4
F4
I
J
B
Check Points after Installing Product
Once the smart door lock is completely installed, check if it is properly operating. After installation, check
the following:
After authenticating the PIN Code on the exterior unit, check if the dead bolt is operating normally.
Manually check if the knob of the interior unit is operating smoothly.
Press the [OPEN/CLOSE] button of the interior unit to check if the dead bolt is normally operating.
While the door is closed, check if the dead bolt is operating and not hitting the door.
