89
ma
nag
e
rs
Define a server profile
1. In Standby mode, press [
]
→
Tools
→
Dev. mgr.
2. Press <
Options
>
→
Server profiles
.
3. Press <
Options
>
→
New server profile
.
4. Set the following server options according
to the instructions provided by your service
provider:
•
Server name
: set a name for this profile
•
Server ID
: set the ID of the remote
server
•
Server password
: set the password
that must be used by the device
manager to sync your device
•
Access point
: set an access point
•
Host address
: set the web address of
the host server
•
Port
: set a port to use for the device
manager
•
User name
: set a user name for this
profile
•
Password
: set a user password for this
profile
•
Allow configuration
: set to allow the
server to configure your device
•
Auto-accept all requests
: set to
automatically accept new configuration
requests
•
Network authentication
: set to require
network authentication
5. When you are finished setting the options,
press <
Back
>.
Start a configuration session
1. In Standby mode, press [
]
→
Tools
→
Dev. mgr.
2. Press <
Options
>
→
Server profiles
.
3. Scroll to a server profile and press
<
Options
>
→
Start configuration
.
4. Press <
Yes
> to confirm.
5. Scroll to an access point and press the
Confirm key (if necessary).
