SAMSUNG Proprietary-Contents may change without notice
2. SGH-E710 Flow Chart of Troubleshooting
2-
1
This Document can not be used without Samsung's authorization
1. Power ON
'Power ON' Does not work
Check the current consumption
Current consumption
≥100mA ?
Check the V bat. voltage
Down load again
Voltage ≥ 3.3V ?
Check the pin of U100
pin #11 ≥ 2.8V ?
Pin #9=1.8V?
Check the Initial operation
END
pin #39 and #33 = 2.8V
Charge the Battery
Check the clock generation
circuit (OSC400, U402 pin#4)
Check the clock signal
at pin #3 of OSC400
Freq.=13MHz,Vrms 300mV
Check U100 and C109
Check U100 and C110
NO
NO
NO
NO
NO
NO
YES
YES
YES
YES
YES
YES
