SAMSUNG Proprietary-Contents may change without notice
Disassembly and Assembly instructions
5-6
This Document can not be used without Samsung's authorization
1) Put the sponge guide on slide upper.
2) And put the Tape LCD FPCB on sponge
guide to guide.
1) Fold LCD FPCB like a picture
2) And insert other side to front-rear hole.
3) Verify the FPCB size.
5
7
6
8
1) Fasten a screw at 4 points with driver
after slide up.
1) Put the 2 kind of screw caps on screw
hole.
< KEY PAD >
< SPONGE GUIDE >
< UPPER wall>