SAMSUNG Proprietary-Contents may change without notice
Disassembly and Assembly instructions
5-4
This Document can not be used without Samsung's authorization
5-3. Disassembly
1
4
3
2
기준선에 맞추어서 녹색
절연 TAPE을 부착한다.
(가로: GASKET, 세로: SUS
HOLE)
REAR 양면 TAPE의 왼쪽 끝부
분과
EL KEYPAD 접점 FPCB 양면
TAPE의
오른쪽 끝을 정확히 맞추어서
부착한다.
Attach the EL KEYPAD
contact point FPCB to
the end of left side of
REAR double sided
tape.
Attach the
green tape
along by the
base line.
1.Insert EL KEYPAD FPCB into the EL KEYPAD
HOLE of the FRONT.
2.Insert a point of EL KEYPAD contact into
the HOLE of the FRONT.
3.Attach the EL KEYPAD along by the end of
EL KEYPAD GUIDE LINE of the Front
※
caution
1) Be careful NOT TO DAMAGE the EL KEYPAD
FPCB.
2)
Do NOT OVERPOWER attaching the EL
KEYPAD.
1.Remove the exfoliation paper of the double
sided TAPE of the REAR.
2.Remove the exfoliation paper of the double
sided TAPE of the EL KEYPAD CONTACT
POINT.
3.Attach the EL KEYPAD contact point FPCB
along by the base line.
4.Attach a green tape. (the width to the end
of GASKET, the length to the SUS HOLE of
REAR)
※
caution
1) Be careful NOT TO DAMAGE the EL KEYPAD
FPCB.
2)
Be careful NOT TO ATTACH the green tape on
the GASKET.
3)
Do NOT FOLDER the EL KEYPAD contact point
FPBC by constraint.
1.Attach the SUB LCD first on the LOWER.
2.Press the WIRE with a finger not to remain
it on the SPEAKER/MOTOR and fixtures.
3.Remain the MOTOER WIRE exactly between
SCREW BOSS and a fixture.
※
caution
1) Do NOT remain the WIRE on the RIB.
2)
Press the LCD to attach well on the LOWER.
(Do NOT OVERPOWER Pressing the SUB LCD.)
1.Attach a black LCD ESD TAPE along by the
SUB LCD outline.
※
caution
1) Press the LCD well NOT to get loose.(Do
NOT OVERPOWER Pressing the SUB LCD.)