Section 8: Changing Your Settings
119
Voice Command Settings
Sect
ion 8
Voice Command Settings
Choice Lists
If VoiceSignal is not absolutely confident that it has
correctly identified a name or number, it can display a
choice list of up to three possibilities, and prompt you
to confirm the correct one.
You can control when choice lists appear by changing
the Choice Lists setting to Automatic, Always On, or
Always Off.
•
Automatic —
VoiceSignal displays a choice list when it is not
confident it has identified the correct choice from among
multiple alternatives.
•
Always On
— When there are multiple alternatives,
VoiceSignal always displays a choice list.
•
Always Off —
VoiceSignal never displays a choice list. Instead,
the application picks the best from among the possible choices.
Sensitivity
In VoiceSignal, “sensitivity” controls the balance
between rejecting too much, which means the phone
frequently does not recognize names, numbers, or
commands, and rejecting too little, which means it
frequently recognizes something even if nothing was
said.
When VoiceSignal rejects an utterance, it displays a
message such as “Please repeat…” or “No match
found.” If you frequently experience these messages,
you might be able to get better recognition by adjusting
the Sensitivity setting toward Reject Less.
Summary of Contents for SGH D406
