Samsung SGH-A827 Series, User Manual, Page: 126 / 153

123
Use this menu to create and customize the profiles containing the
settings for connecting your phone to the network. Although the
active connection can be changed by the user, it is recommended
that this choice be made with the assistance of either the retailer
or customer service representative.
1. At the Idle screen, select Menu
➔
Settings
➔
Set
Connectivity
➔
Connections and press the Select soft
key or the key. Use the Up or Down Navigation key
to highlight one of these options:
• MEdia Net
• AT&T MMS
• AT&T IMS
2.
Press the Options soft key.
Note: The MEdia Net is pre-configured and cannot be altered on this screen. The
AT&T MMS connection option can be edited, renamed, or deleted on this
screen. Your phone is set up by default for connecting to the network. If you
change the settings without first checking with your service provider, the
web browser, MMS, and e-mail features may not work properly.
3.
To create a new connection, press the Options soft key,
select New , and press the Select soft key or the
key.
4.
To edit the existing AT&T MMS, highlight this entry,
press the Options soft key, select Edit , and press the
Select soft key or the key.
5.
Select the parameter you want to edit:
• Set Name : enter a profile name.
• Access Name : edit the access point name.
• Auth Type : select the type of authentication used for this WAP
connection: None, Normal, or Secure.
• User ID : enter the User ID required to connect to the network.
• Password : enter the user password required to connect to the
network.
• Protocol : set the connection protocol used by the WAP browser:
WAP, HTTP, or Other.
• Home URL: enter the URL address of the page to be used as your
homepage.
• Proxy address: set the proxy server address and port.
• Linger Time (Sec.) : sets a time period (in seconds) after which
the network is disconnected if there is no new data traffic.
• Advanced Settings : allows you to configure some of the IP-
specific information: Static IP, Static DNS, Server information, and
Traffic Class.
– Static IP : specify if you want to manually enter an IP address. If
you want the IP address to be automatically assigned by the
server, remove the check mark.
–
Local Phone IP : allows you to configure the local phone IP
address.