21.
Clean the conductive grease off the left side (Non Gear) end cap and replace with fresh grease.
Replace the end cap and three screws. See Figure 22
22.
Install the PCR. See Figure 23
23.
Install the right side end cap and screws. Make sure the PCR fits correctly in its holder, and all the
gears are aligned. The double gear that stayed with the end cap can be installed while on the end cap.
See Figure 24
24.
Fill the hopper with 90g of the 5100 toner. See Figure 25
This can also be done through the fill plug, but the fill plug tends to leak and will probably have to be
sealed with silicon. See Figure 28
FIGURE 20
FIGURE 21
FIGURE 22
FIGURE 23
Page 7 of 11
Summit Laser Products - Samsung SF-5100 Toner Cartridges
4/21/2008
http://www.summitechnologies.com/docs/0307/0307.asp
