Samsung SF-3200 User Manual Download Page 53

Page: 53 / 110

The Answering Machine

4−9

ap
te

the current operation and performs new operation. For
the Remote Commands, "Using Remote Commands"
below.

Press #0 to finish

the remote session.

Important: if you don’t enter ‘#0’, your machine might
not hang up for several minutes.

Using Remote
Commands

The chart below describes which Remote Code you have to
enter for remote operation:

Code

Operation

Exits remote control mode.

Changes the greeting message. After entering the command, speak into the handset. When you finish,

press #. If you run out of recording time, the machine stops and plays back the message.

Plays back all messages. The machine beeps and plays all messages. If there are no messages, the

machine beeps four times and waits for another command to be entered.

Stops the ICM play and waits for remote code when playing ICMs (#2, #5).

Skips a message backward. The machine skips the current message and plays the previous one.

Plays back new messages. The machine beeps and plays all new messages. If there are no new

messages, the machine beeps four times and waits for another command to be entered.

Skips a message forward. The machine skips the current message and plays the next one.

Erases the message currently playing, and plays back the next message.

Turns TAM Mode on/off. The machine plays the greeting message when TAM Mode is turned on.

Each time you press #8 thereafter, TAM mode is turned off, then back on.

Erases all the messages.

Activates Message Forwarding feature. If you do not set up Message Forwarding before you leave,

you cannot turn it on from a remote phone. You will hear error beeps.

Changes Message Forwarding destination number and activates the feature. Press #

2. When you

hear the confirm tone (two−short double beeps), enter the new destination number. You cannot

include # as a dial number. Use

to insert a PAUSE between numbers. When you finish entering

number, press #.

Deactivates Message Forwarding feature.

Exits the fax machine from answering mode.

This code is used at a phone extension connected to the same line as your fax machine

zmTZYWW|rUGGwG`GG{ SGtG_SGYWWXGG`a[[Gwt

Summary of Contents for SF-3200















































































































Search results

Summary of Contents for SF-3200

Reviews:

Related manuals for SF-3200

Brands by name

Popular brands

Samsung SF-3200, User Manual

Search results

Summary of Contents for SF-3200

Reviews:

Related manuals for SF-3200

Brands by name

Popular brands