Samsung SF-3200 User Manual Download Page 18

Page: 18 / 110

Setup and Copying

1−12

490

Making a Copy

Your machine has two kinds of copying; page−to−page and
2−up.

If you want to save ink
while copying or receiv−
ing a fax, see “Copying/
Receiving in Save Ink
Mode” on page 1−14.

•

Page−to−page: Copies the original document page by

page.

•

2−up (Paper Save): Copies two pages into one page

after reduction.
This helps you save the paper. Prior to using this fea−
ture, you have to activate it by following steps:

Activating 2−up Copy

Press Paper.

The display shows the current setting such as ‘ON’ or
‘OFF’.

Press Paper repeatedly until the display shows ‘ON’

and waits until the machine returns to the Standby
mode.
Now, every copy will be printed by 2−up unless you
change the mode to ‘OFF’ in this step.

Making a 2−up Copy

Turn the page face down and insert it into the

document feeder.

Adjust the document guide

to match the width of the

document.

Feed the document into the machine.

The automatic

document feeder pulls in the page.
If necessary, press Rcv.Mode

Contrast to choose the

desired contrast for the document.

zmTZYWW|rUGGwGXYGG{ SGtG_SGYWWXGG`a[[Gwt

Summary of Contents for SF-3200















































































































Search results

Summary of Contents for SF-3200

Reviews:

Related manuals for SF-3200

Brands by name

Popular brands

Samsung SF-3200, User Manual

Search results

Summary of Contents for SF-3200

Reviews:

Related manuals for SF-3200

Brands by name

Popular brands