Samsung SENS R560 Series, Service Manual

Page: 35 / 45

2-24
2. Introduction and Specification
- 이 문서는 삼성전자의 기술 자산으로 승인자만이 사용할 수 있습니다 -
- This Document can not be used without Samsung's authorization -
Advanced
Intel(R) SpeedStep(TM)
This selects whether Intel® SpeedStep™ Thchnology is enabled or not.
Legacy USB Support
Enable support for Legacy Universal Serial Bus.
Large Disk Access Mode
UNIX, Novell NetWare or other O/S, select ‘Other’.
AHCI Mode Control
Select a AHCI mode always enabled or disabled.
EDB (Execute Disable Bit)
supports the Data Execution Prevention (DEP) feature. DEP is a set of H/W & S/W technologies that perform additional checks
on memory to help prevent malicious code from running on a system.
Internal LAN
“Enabled” will allow the internal LAN to operate correctly.
Touch Pad Mouse
‘Disabled’ prevents installed Touch Pad mouse from functioning, but frees up IRQ 12. ‘Enabled’ forces the Touch Pad mouse to be
enabled.
CPU Power Saving Mode
‘Enabled’ will decrease system power consumption.
USB S3 Wake-up
Select Enabled to support that system can be waked up from ACPI S3 state by USB activities.
Purchased Date
Purchased date is displayed after 10 times boot.
Phoenix SecureCore(tm) Setup Utility
Main Advanced Security Boot Exit
Item Specific Help
Intel (R) SpeedStep (TM) [Enabled]
Legacy USB Support [Enabled]
Large Disk Access Mode [DOS] This selects whether
Intel (R) SpeedStep (TM)
AHCI Mode Control [Enabled] Techhnology is enabled
EDB (Execute Disable Bit) [Disabled] or not.
Internal LAN [Enabled]
Touch Pad Mouse [Enabled] 'Disbled' means that
CPU Power Saving Mode [Enabled] system does not support
USB S3 Wake-up [Disabled] Intel (R) SpeedStep (TM)
Technology.
Purchased Date 2008/04
'Enabled' is recommened.
F1
Help  Select Item
F5/F6
Change Values
F9
Setup Defaults
ESC
Exit  Select Menu
Enter
Select  Sub-Menu
F10
Save and Exit
•
•
•
•
•
•
•
•
•
•