Samsung SDH-C74040 User Manual Download Page 52

Page: 52 / 147

52_

main menu

Monitor

You can configure information to be displayed and its format for Spot Out monitor.

Setting the Monitor

Using the mouse may help make setup easier.

Use the up/down buttons (

) in <

Device

> window to

move to <

Monitor

>, and press [

ENTER

] button.

Select <

Monitor

Use direction buttons (

◄ ►

) to move to a desired

item, and set the value.

•

Event Display : Sets the dwell time of the event channel

display on the monitor when an event occurs.

If selected <

Continuous

>, it displays the channel until you

press [

ALARM

] button to release it.

•

Display : Displays only checked items on the monitor

screen.

•

Multi CH SEQ Time : Sets the interval between automatic display switching in 4-split and 9-split mode of

the Live screen.(SDR-C75300)

•

VGA/HDMI : Set your preferred screen resolution to <

VGA

> or <

HDMI

If the monitor does not support selected resolution of <

VGA

> or <

HDMI

>, it may not display video properly.

•

HDMI Resolution Auto Detection: If the option is checked on and the HDMI is available, DVR will

automatically adjust optimized resolution based on monitor's setting. If you need to configure the resolution

manually, please turn the option off.

When the monitor setup is done, press <

Screen Setup

Some monitors may not display information (camera name, icon, time information, etc.) about the DVR,

depending on the condition. Then, you can change the display position of the data.

In the <

Device

> window, press the up/down (

) button

to move to <

Monitor

> and press the [

ENTER

] button.

Select the <

Monitor

> item.

Select <

Display Position Setup

> in the bottom.

You will move to the <

Display Position Setup

> window.

Use the four direction buttons or the number buttons on

the remote control to adjust the data position.

Monitor

Mode

Event Display

OFF

Display

Date

Time

CH Name

Icon

Multi CH SEQ Time 5 sec

VGA/HDMI

1920X1080

HDMI Resolution Auto Detection ON

Cancel

Display Position Setup

2015-01-01 01:10:25

Display Position Setup

Cancel

Summary of Contents for SDH-C74040




















































































































































Search results

Summary of Contents for SDH-C74040

Reviews:

Related manuals for SDH-C74040

Brands by name

Popular brands

Samsung SDH-C74040, User Manual

Search results

Summary of Contents for SDH-C74040

Reviews:

Related manuals for SDH-C74040

Brands by name

Popular brands