Samsung SDH-C74040 Page 145 User Manual Download

Page: 145 / 147

endorse or promote products derived from this software without prior

written permission.

THE AUTHORS OF THIS SOFTWARE DISCLAIM ALL WARRANTIES

WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT

SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR

CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER

RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN

AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS

ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR

PERFORMANCE OF THIS SOFTWARE.

Redistribution and use in source and binary forms, with or without

modification, are permitted provided that the following conditions are

met:

Redistributions of source code must retain the above copyright notice,

this list of conditions and the following disclaimer.

Redistributions in binary form must reproduce the above copyright

notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

The name(s) of the authors of this software must not be used to

endorse or promote products derived from this software without prior

written permission.

THE AUTHORS OF THIS SOFTWARE DISCLAIM ALL WARRANTIES

WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT

SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR

CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER

RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN

AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS

ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR

PERFORMANCE OF THIS SOFTWARE.

Non-exclusive rights to redistribute, modify, translate, and use this

software in source and binary forms, in whole or in part, is hereby

granted, provided that the above copyright notice is duplicated in any

source form, and that neither the name of the copyright holder nor the

author is used to endorse or promote products derived from this

software.

THIS SOFTWARE IS PROVIDED ``AS IS’’ AND WITHOUT ANY EXPRESS

OR IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE

IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A

PARTICULAR PURPOSE.

Redistribution and use in source and binary forms, with or without

modification, are permitted provided that the following conditions are

met:

Redistributions of source code must retain the above copyright notice,

this list of conditions and the following disclaimer.

Redistributions in binary form must reproduce the above copyright

notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

The name(s) of the authors of this software must not be used to

endorse or promote products derived from this software without prior

written permission.

Redistributions of any form whatsoever must retain the following

acknowledgment: “This product includes software developed by

Tommi Komulainen <[email protected]>”.

THE AUTHORS OF THIS SOFTWARE DISCLAIM ALL WARRANTIES

WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT

SHALL THE AUTHORS BE LIABLE FOR ANY SPECIAL, INDIRECT OR

CONSEQUENTIAL DAMAGES OR ANY DAMAGES WHATSOEVER

RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN

AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS

ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR

PERFORMANCE OF THIS SOFTWARE.

Redistribution and use in source and binary forms, with or without

modification, are permitted provided that the following conditions are

met:

Redistributions of source code must retain the above copyright notice,

this list of conditions and the following disclaimer.

Redistributions in binary form must reproduce the above copyright

notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

The name “Carnegie Mellon University” must not be used to endorse

or promote products derived from this software without prior written

permission. For permission or any legal details, please contact Office

of Technology Transfer Carnegie Mellon University 5000 Forbes

Avenue Pittsburgh, PA 15213-3890 (412) 268-4387, fax: (412)

268-7395 [email protected]

Redistributions of any form whatsoever must retain the following

acknowledgment: “This product includes software developed by

Computing Services at Carnegie Mellon University (http://www.cmu.

edu/computing/).”

CARNEGIE MELLON UNIVERSITY DISCLAIMS ALL WARRANTIES

WITH REGARD TO THIS SOFTWARE, INCLUDING ALL IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS, IN NO EVENT

SHALL CARNEGIE MELLON UNIVERSITY BE LIABLE FOR ANY

SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY

DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA

OR PROFITS, WHETHER IN AN ACTION OF CONTRACT,

NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR

IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS

SOFTWARE.

Redistribution and use in source and binary forms, with or without

modification, are permitted provided that the following conditions are

met:

Redistributions of source code must retain the above copyright

notice, this list of conditions and the following disclaimer.

Redistributions in binary form must reproduce the above copyright

notice, this list of conditions and the following disclaimer in the

documentation and/or other materials provided with the distribution.

Neither the name of the copyright holder nor the names of its

contributors may be used to endorse or promote products derived

from this software without specific prior written permission.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND

CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED

WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE

DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR

CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,

PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF

USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER

CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN

CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE

OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS

SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH

DAMAGE.

Component Name

License

License URL

hdparm-9.39

BSD-License

http://www.opensource.org/licenses/bsd-license.html

Summary of Contents for SDH-C74040




















































































































































Search results

Summary of Contents for SDH-C74040

Reviews:

Related manuals for SDH-C74040

Brands by name

Popular brands

Samsung SDH-C74040, User Manual

Search results

Summary of Contents for SDH-C74040

Reviews:

Related manuals for SDH-C74040

Brands by name

Popular brands