COLOR CCD CAMERA
COLOR CCD CAMERA
User’s Manual
User’s Manual
13
12
Installation Procedures
1. Please take off the CCD protection cap
and C-mount adaptor.
2. Please attach the CS-Mount lens to the
camera by screwing it in clockwise.
C-mount adaptor
CCD protection cap
CS-mount adaptor
When using a CS-Mount lens
• Please use the specified lens connection parts as shown in the picture below.
The use of the wrong sized parts of the wrong size may cause damage to the inside of
the camera or result in poor fitting.
• Use of a lens which is too heavy affects the balance of the
camera and may cause a malfunction. Please use a lens
that weighs less than 450g.
• Please select Av mode if possible when adjusting the
automatic light control (ALC) of an auto lens. Use of PK
mode may cause hunting.
Notes
C-mount lens : 10 mm or less
CS-mount lens : 5 mm or less
Connecting a Monitor
Connecting Power
Please connect the video output terminal located on the back of the camera to the monitor.
• The connection method varies depending on the type of monitor and accessories.
Please refer to the user's manual for each instrument.
• Please turn off the power when connecting.
• Please select Hi-Z on the 75
Ω
/Hi-Z switch for the intermediate video TV set and select
75
Ω
for the Intermediate device as shown in the picture below.
CCD Camera
CCD Camera
Intermediate End
monitor
Monitor
Each model has a different power input specification. Please check the model type and
standard power requirement before connecting to power.
• Use AC24V, 300mA adaptor or DC12V,
500mA for SDC-425N/P
AC/DC Power Type
• Use AC230V, 50Hz power source for SDC-
425PH.
High Voltage Type (AC230V, 50Hz)
• Use DC12V, 500mA for SDC-425ND/PD
DC Power Type
