background image

3

COLOR CCD CAMERA

This installation should be made by a qualified service 

person and should conform to all local codes.

The lightning flash with arrowhead symbol, within an equilateral
triangle is intended to alert the user to the presence of uninsulated
"dangerous voltage" within the product's enclosure that may be of
sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert
the user to the presence of important operating and maintenance
(servicing) instructions in the literature accompanying the appliance.

RISK OF ELECTRIC SHOCK

DO NOT OPEN

TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK), 

NO USER SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED

SERVICE PERSONNEL.

CAUTION

CAUTION :

INFORMATION - This equipment has been tested and found to comply with
limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This
equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful
interference in which case the user will required to correct the interference at his
own expense.

WARNING - Changes or modifications not expressly approved by the

manufacturer could void the user’s authority to operate the equipment.

CAUTION : To prevent electric shock and risk of fire hazards:

Do NOT use other than specified power source.

Do NOT expose this appliance to rain or moisture.

Thank you for purchasing a SAMSUNG CCD CAMERA.
Before operating the camera, confirm the camera model and proper input power 
voltage. In order that you can understand this manual thoroughly, we'll introduce our 
model description.

SDC-311 Series (410,000 Pixels)

•NTSC models                   • PAL models
– SDC-311ND  

– SDC-311PD

– SDC-311NA  

– SDC-311PA
– SDC-311PH

SDC-241 Series (270,000 Pixels)

•NTSC models                   • PAL models

– SDC-241ND  

– SDC-241PD

– SDC-241NA

– SDC-241PA
– SDC-241PH

Model Description
SDC-311 x x
SDC-241 x x

• Signal System

N  

NTSC Model

P   

PAL Model

• Power Source

D   

DC 12V 

A   

AC 24V

~

H   

High Voltage (PAL Model: AC 230V

~

)

power source

signal system

2

COLOR CCD CAMERA

Summary of Contents for SDC-241 SERIES













Reviews: