English
_
English
FOCUS mODE
You can select a focus mode according to the
angle that you adjusted for camera recording.
- AF : This will monitor the screen continuously
to focus automatically. If you adjust the focus
manually, that will operate the same as in
<
mF
>. This will also restore focus after the
operation of zoom.
- SENSITIVITY : Indicates the sensitivity
of auto focus, which you can
adjust between level 1 and level 7.
The closer your setting is to 7, the more
sensitively the auto focus function performs.
The Night setting is used when a strong
light reflects in a low contrast scene.
You can set it to OFF, LOW, MEDIUM, or
HIGH; set it to <
HIGH
> when there exist a
strong light such as street light.
- ONEAF : Restores focus after the operation
of zoom, and operates the same as in <
mF
>
unless the operation of zoom is executed.
- MF : You can adjust the focus manually.
While you are working on the following objects, <
AF
> may not work properly.
If this is the case, use <
MF
> instead.
- Very bright object, or dominant object in a dark scene
- Object against the rear side of a moist or dirty glass
- A scene where nearby and distant objects co-exist
- White wall or single-colored object
- Venetian blinds and other horizontally striped objects
ZOOm SPEED
You can adjust the zoom operation speed.
DISPLAy ZOOm
You can set to display the zoom status on the screen.
It will disappear in about 3 seconds if the zoom factor has no further change.
M
AF
SENSITIVITY
[5]
NIGHT
MID
DAY/NIGHT
AUTO
WHITE BAL
FOCUS MODE
AF
ZOOM SPEED
[2]
DISPLAY ZOOM
OFF
DIGITAL ZOOM
X16
DETAIL
[2]
V-SYNC
INT
AGC COLOR SUP
MID
SCZ-2430P(D)-3430P(D)-ENG.indd 25
2010-5-26 16:42:27
