20_
camera operation
camera operation
RN
⼿#
Select one of the following 6 modes, as appropriate for your purpose.
ATW
:
Select this when the color temperature is between 1,800˚K and
10,500˚K.
MANUAL
:
Select this to fine-tune White Balance manually. Set White
Balance first by using the ATW or AWC mode. After that switch
to MANUAL mode, fine-tune the White Balance and then press
the Function Setup switch.
AWC
⽍
SET
:
To find the optimal luminance level for the current environment,
point the camera towards a sheet of white paper and press the
Function Setup switch. If the environment changes, readjust it.
OUTDOOR
:
Select this when the color temperature is between 1,700˚K and
11,000˚K. (sodium light inclusion)
INDOOR
:
Select this when the color temperature is between 4,500˚K and
8,500˚K.
MERCURY
:
This is an auto compensation function that optimizes camera
colors for the environments such as mercury lamps. (Color
temperature : 2400°K~11000°K)
White Balance may not work properly under the following conditions. In
this case select the AWC mode.
➊
When the color temperature of the environment surrounding the subject
is out of the control range (e.g. clear sky or sunset).
➋
When the ambient illumination of the subject is dim.
➌
If the camera is directed towards a fluorescent light or is installed in a
place where illumination changes dramatically, the White Balance
operation may become unstable.
BACKLIGHT
Unlike conventional cameras, the SCZ-2373/2273
is designed to deliver a distinctive subject and
background at the same time, even when the
subject is backlight, by using the features of the
proprietary SV-V DSP chip.
When the SETUP menu screen is
displayed, select ‘Backlight’ by using the Up and Down buttons so that the
arrow indicates ‘Backlight’ .
y
y
y
y
y
y
I
1.
MAIN SETUP
SSDR ON
WHITE BAL
ATW
䯝
BACKLIGHT OFF
MOTION DET OFF