19. Release the second clip located at the opposite end just
above the developer roller.
20. Remove the support plate and pull out the developer roller.
21. Now we are ready to clean and reassemble the cartridge.
INSTALLING THE DOCTOR BLADE
22. After you have reinstalled the components, use a rubber
adhesive to bond the foam seal back in its original place.
Bonding the foam will prevent leaks.
SAMSUNG SCX-4100 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]
www.
uninet
imaging.com
