11. PCR and OPC drum removed.
REPLACING THE DOCTOR BLADE
12. Follow steps 12-14 and 22 for replacing and installing the
doctor blade. You may skip these steps if you are not replacing
the doctor blade.
First, use a utility knife to detach the foam seal from the
doctor blade as shown.
13. Once the foam seal is completely detached, you are then
ready to remove the doctor blade.
14. Lift the blade up, then slide out as shown.
SAMSUNG SCX-4100 TONER CARTRIDGE REMANUFACTURING INSTRUCTIONS
© 2010 UniNet Imaging Inc. All trademark names and artwork are property of their respective owners. Product brand names mentioned are intended to show compatibility only.
UniNet Imaging does not warrant downloaded information. Unauthorized sale, reproduction or distribution of this article is prohibited. For additional support, please contact [email protected]
www.
uninet
imaging.com
