Samsung SCW61, Service Manual

Page: 62 / 125

Samsung Electronics 4-43
Alignment and Adjustment
MODEL NAME ADDRESSED CODE
TAPE
*NTSC
STANDARD COLOR BAR TAPE
RECORDED WITH SP SPEED
POWER SOURCE
NONE
NONE
061
HD SWP
EQUIPMENT
OTHER
TEST POINT
ADDRESS
NAME
1. Kinds of adjustment in PLAY mode.
4-3-3 Adjustment
ADDRESS NAME
NORMAL MODEL HI 8 MODEL
NTSC PAL NTSC PAL
061
062
HD SWP
Adjustment
1C
Model code setting 063
32. 768 KHZ CLOCK
064
MODEL CODE
065
D.ZOOM SIZE
TBC DEFAULT
05
50
2. Adjustment
* Please keep the order according to explanation.
2-1. Setting of the model code0
a. Preparation
b. Connect a power source.
c. Get into the VCR adjustment mode.
d. Press the ÒBLC(MODE UP)Ó or
ÒFADE(MODE DOWN)Ó button of Camcorder
so as to select the address 063.
e. Press the ÒDSE(DATA DOWN)/P.AE(DATA
UP)Ó so that OSD showsÒ ÓERR:XX EVR: XXÓ
ÒXXÓ is different dependent on the model as
below.
f. Be sure to press the ÒENTER(CONFIRM)Ó but-
ton on Camcorder to memorize setting.
g. Reset the power source so as to fix the new data
to the CamcorderÕs EEPROM.
TAPE NONE
POWER SOURCE
NONE
NONE
063
MODEL CODE0
EQUIPMENT
OTHER
TEST POINT
ADDRESS
NAME
2-2. Head Switching Point
: This adjustment is performed after the
replacement of deck mechanism.
¥ Without this adjustment, there will be a noise
in playback picture.
a. Preparations
b. Connect a power source.
c. Get into the VCR adjustment mode.
d. Press the ÒBLC(MODE UP)Ó or ÒFADE(MODE
DOWN)Ó button of Camcorder so as to select
the address 061.
e. Insert the Standard Color Bar Tape and press
the ÒPLAYÓ button.
Note : If there is no video out, when you pressed
the ÒPLAYÓ button, you can not adjust the
Head Switching Point.
It may be caused by maladjusted VIDEO
block.
In this case, adjust the VIDEO block before
the Head Switching Point.
01
05
01
SCW61 74
SCW62 74
VP-W60 60
VP-W61 64
VP-W63 67
NTSC
PAL