English_29
●
Camera Opera
ti
O
n
y
moTion :
This product generates signals each time an object movement is
detected in the four areas of the screen so efficient monitoring can be
achieved.
❶
MM
If the SPECIAL menu screen is
displayed, use the Function Setup
switch so that the arrow indicates
‘MOTION’.
❷
MM
Select a desired mode using
the Function Setup switch.
-
DET.AREA : Set the areas of motion detection.
y
SEL AREA : Select from four areas that users want.
y
MODE : Determine whether to use the selected area.
y
TRANSPARENCY : Adds or removes transparency from the masking area.
y
TOP/BOTTOM/LEFT/RIGHT : Area location can be adjusted.
y
RETURN : Return to the MOTION DET menu.
-
SENSITIVITY : Set the sensitivity of the motion detection. When you adjust the
higher level, the more sensitive.
-
RETURN : Return to the SPECIAL menu.
ExiT
Select a desired EXIT mode using the Function Setup switch depending on the
camera purpose.
y
saVE :
Save the current settings and exit the MAIN SETUP menu.
y
noT saVE :
Do not save the current settings and exit the MAIN SETUP menu.
y
rEsET :
Revert camera to factory settings. (The language, communication and
lens settings will remain the same).
MOTION DET
▶
1. DET.
AREA
2.
SENSITIVITY
IIIIIIIIII
I
IIIIIIIIII
5
3.
RETURN
