56_
setup
setup
PTZF Setting
If you open the PTZF setup menu, you will see the following
window. You can use the joystick to select a desired number.
Select a preset number and press ENTER. You will move
to the setup screen.
Using the joystick, adjust the location of the Pan and Tilt
functions and then set the Zoom and Focus command.
In Preset mode, the zooming focus can be controlled only
by the zoom command.
For switching modes, refer to the menu bar in the bottom.
Edit
With this feature, you can edit or save the video-related settings
for each preset of the camera.
PTZ : Recalls saved locations using the Preset Settings command.
Focus : Refer to the section entitled Setting Up Your Camera.
Brightness : Refer to the section entitled Setting Up Your Camera.
Iris : Refer to the section entitled Setting Up Your Camera.
Back Light : Refer to the section entitled Setting Up Your Camera.
Day/Night : Refer to the section entitled Setting Up Your Camera.
After Action : Enables setting up an automatic action after the
camera arrives at a selected preset location.
MD : Perform the intelligent motion detection.
Detect Box: Display an object in a box that is detected to move in your
specifi ed type.
Detect Area : You can specify a motion detection area.
Mask Area : You can specify an exceptional area to motion detection by
masking the area.
You can set up to 4 areas, for each of which you can
change the mask coordinates.
Sensitivity : Specify the sensitivity level of the motion detection.
The lower the level is, the stronger the sensitivity becomes.
Detect Size : Specify the size of an object to detect on the screen.
The higher the level is, the greater the size becomes.
OFF : Select this when no action is desired.
Scene Adj : You can set AGC, Stabilizer, SSNR, SSDR, Shutter,
Sens-Up and White Balance functions. For terms
related to settings, refer to the camera settings
commands.
1.
2.
-
-
-
-
-
-
-
y
y
y
y
y
-
Preset
Setting
Preset = 001 (1~255)
001
:
ⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰ
021
:
ⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰ
Preset
Setting
1+PST:ZOOM 2+PST:FOCUS
Æ
Preset
Setting
Edit
Home Position
OFF
Execute
Clear
Status
Preset
Edit
Preset = 001
Ã
(1~255)
001 :
ⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰ
021 :
ⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰⶰ
Æ
Æ
Preset
Edit
[001]
PTZ
XXX/XXX/XXX
Focus
ONE
SHOT
Brightness
050
Iris AUTO
Back
Light
OFF
Day/Night
AUTO
After
Action
OFF
Scene
Adj
Detection
Detect
Box
ON
Detect
Area
Mask
Area
Sensitivity
3
Det.
Size
