Samsung SCH-R970, User Manual, Page: 135 / 243

Connections 129
Scanning and Connecting to a Wi-Fi Network
1. Turn Wi-Fi on (see “Turning Wi-Fi On” on page 128).
Your phone scans for available hotspots and pops-up a
list of any it finds.
2. To connect to a hotspot, touch it on the pop-up list.
• If the Wi-Fi network is open, you will be automatically
connected.
• If the Wi-Fi network is secured, enter the password at the
prompt to connect.
Adding a Wi-Fi Network Manually
1. From the Home screen, touch Menu ➔ Settings ➔
Wi-Fi . The Wi-Fi options screen appears. (For more
information, refer to “Accessing Settings” on page
140.)
2. Touch Wi-Fi to turn on Wi-Fi.
3. Touch Add Wi-Fi network , then enter the following
values:
• Network SSID : Enter the name of the WAP (Wireless Access
Point).
• Security : Select the type of security used by the WAP.
• Password : If the WAP is secured, enter the password or key.
Wi-Fi Direct
Wi-Fi Direct allows devices to connect to each other directly
via Wi-Fi, without a Wi-Fi network or hotspot, and without
having to set up the connection. For example, some printers
support Wi-Fi Direct, and you could print from your phone via
Wi-Fi Direct.
Establishing Wi-Fi Direct Connections
1. From the Home screen, touch Menu ➔ Settings ➔
Wi-Fi ➔ Wi-Fi Direct .
The Wi-Fi Direct screen appears, and your phone scans
for available Wi-Fi Direct devices and lists them under
Available devices .
2. To connect to a single Wi-Fi Direct device, touch its
name in the list.
3. To connect to multiple Wi-Fi Direct devices, touch
Multi-connect , next touch Select all or individual
devices, then touch Done .
DRAFT
FOR
INTERNAL
USE
ONLY