91
90
G
Go
oN
Ne
exxtt//M
MS
SG
G
Auto Recv Set
You can set the phone to function as a modem to
send or receive data and fax calls.
The following options are available.
Release Auto Recv: The mode for the data and fax
is released. Your phone can send or receive the
voice calls only.
Modem Auto Recv: The mode for data calls is set.
The phone automatically receives incoming data
when the data cable is connected.
Fax Auto Recv: The mode for fax calls is set. The
phone automatically receives incoming fax calls
when the data cable is connected.
Comm. Speed Set
This menu allows you to select the speed for the
communication between your phone and the
computing device.
Select the desired speed. For the fax calls, select
Fax Only.
Sounds
Using this menu, you can customize the various sound
settings, such as:
• Ring type
• Ring volume
• Tone to sound when your call is connected or
disconnected
• the length of the DTMF tone
Note: When the phone is in Manner mode (see page
xx), you cannot use this menu.
Bell/Vibration
Menu 6-1
This option allows you to indicate how you are to be
informed of any incoming calls.
The following options are available:
Bell/Melody: The phone rings using the bell or
melody selected via the Music Box menu (Menu 1).
Vibration: The phone vibrates but does not ring.
Lamp: The backlight is switched on and the service
light blinks; the phone neither rings nor vibrates.
Vibration & Bell: The phone vibrates and rings.
Bell & Vibration: The phone rings and vibrates.
Bell (Increase): The phone rings using the ring tone,
but the ring volume increases from the lowest level.
Bell (Decrease): The phone rings using the ring tone,
but the ring volume decreases from the loudest level.
